Ctl NX2700 Manual de usuario descargar pdf (Pagina 68)

CONTROL KEYPAD vacon • 67

24-hour support: +358 (0)40 837 1150 • Email: vacon@vacon.com

9.2 Keypad push-buttons

The Vacon alphanumeric control keypad features 9 push-buttons that are used for the control of the

frequency converter (and motor), parameter setting and value monitoring.

Figure 9-2. Keypad push-buttons

9.2.1 Button descriptions

reset = This button is used to reset active faults (see Chapter 9.3.4).

select = This button is used to switch between two latest displays. May be useful

when you want to see how the changed new value influences some other

value.

enter = The Enter button serves for:

1) confirmation of selections

2) fault history reset (2…3 seconds)

= Browser button up

Browse the main menu and the pages of different submenus.

Edit values.

= Browser button down

Browse the main menu and the pages of different submenus.

Edit values.

= Menu button left

Move backward in menu.

Move cursor left (in parameter menu).

Exit edit mode.

Hold down for 3 seconds to return to main menu.

= Menu button right

Move forward in menu.

Move cursor right (in parameter menu).

Enter edit mode.

= Start button.

Pressing this button starts the motor if the keypad is the active control

place. See Chapter 9.3.3.

= Stop button.

Pressing this button stops the motor (unless disabled by parameter

R3.4/R3.6). See Chapter 9.3.3.





start

stop

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 102 103

Sin comentarios

Ctl NX2700 Manual de usuario Pagina 68