Ctl NX2700 Manual de usuario Pagina 87
- Pagina / 103
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
86 • vacon CONTROL KEYPAD
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
9
Multimonitoring items (P6.5.4)
Vacon alpha-numeric keypad features a display where you can monitor even three actual values at
the same time (see chapter 9.3.1 and chapter
Monitoring values
in the manual of the application you
are using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to
replace the values monitored with other values. See below.
Figure 9-17. Enabling the change of multimonitoring items
9.3.6.6 Keypad settings
In the Keypad settings submenu under the
System menu
you can further customise your frequency
converter operator interface.
Locate the Keypad settings submenu(S6.6). Under the submenu, there are four pages (P#)
associated with the keypad operation:
Figure 9-18. Keypad settings submenu
Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves as the
Timeout time
(see below) has expired or as the power is switched on to the keypad.
If the
Default Page
value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the
Menu button right
once to enter the edit mode. Change the number of the
Main menu with the
Browser buttons
. Pressing the
Menu button right
once again makes you able to
edit the number of the submenu/page. If the page you want to move to by default is at the third level
repeat the procedure. Confirm the new default page value with the
Enter button
. You can return to
the previous step anytime by pushing the
Menu button left
.
Figure 9-19. Default page function
0.
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
0.
1.
enter
Default page
REPEAT TO SET
DEFAULT SUBMENU/PAG
E
CAN CEL
Default pageDefault page
CONFIRM CHANGE
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
Multimon. items
ChangeEnable
Multimon. items Multimon. items
ChangeEnable ChangeDisable
P1
P5
READY
I/Oterm
0.
READY
I/Oterm
Keypad settings
Default page
- START-UP QUICK GUIDE 2
- CONTENTS 3
- VACON NXC USER’S MANUAL 3
- Document code: ud01011.doc 4
- Date: 8.1.2009 4
- Warning symbols 7
- Dangerous voltage 7
- General warning 7
- Hot surface – Risk of burn 7
- EU DECLARATION OF CONFORMITY 9
- 2004/108/EC 9
- Drive modified 10
- 3.1.1 NX type designation 10
- 3.2.9 Door Mounted (D-group) 12
- 18 • vacon TECHNICAL DATA 19
- 4.2 Technical data 19
- TECHNICAL DATA vacon • 19 20
- MOUNTING vacon • 21 22
- Figure 5-2. Lifting the unit 23
- Terminal numbers 25
- MOUNTING vacon • 27 28
- [kw] = P 29
- [kW] x 0,025 29
- 6.2.2 Mains and motor cables 34
- *Recommended 35
- EMC-earthing clamp for 36
- Connect the PE 37
- Installing the cable gland 40
- 6.2.5 Control cable 43
- 6.2.6.1 6-pulse drives 44
- 6.2.6.2 12-pulse drives 45
- 6.2.7.1 6-pulse drives 47
- 6.2.7.2 12-pulse drives 48
- REM-MAN-AUTO 50
- 0-1-Start 50
- 7.1.1 Manual operation (MAN) 50
- 0–1-Start 50
- Continues on the next page 54
- Basic relay board 58
- Control I/O 59
- FAULTSTOP 66
- 9.2.1 Button descriptions 68
- Main menu 69
- Browser buttons 69
- Menu buttons 69
- Menu button right 69
- No editing! 70
- 13.95 Hz 71
- 2 Push the 72
- Min Frequency Min Frequency 73
- Bus/Comm 74
- 9.3.3.2 Keypad reference 75
- Enter button 75
- 9.3.3.3 Keypad direction 75
- 9.3.3.4 Stop button activated 75
- F T1 76
- Fault time data record menu 77
- 9.3.4.3 Real time record 77
- Fault history 11 Output phase 78
- Operation days 78
- PUSH to reset 78
- 9.3.6 System menu (M6) 79
- System menu 79
- CONTROL KEYPAD vacon • 79 80
- Francais 81
- Standard 82
- Multi-step 82
- LoadFactDef 83
- Not in use 85
- Startup wizard Startup wizard 86
- Startup wizard 86
- ChangeEnable 87
- ChangeEnable ChangeDisable 87
- Timeout time 88
- Timeout time Timeout time 88
- Continuous 89
- Temperature 89
- HMI ACK timeout 90
- Not reset Not reset 91
- Not reset 91
- NXFIFF01 92
- A:NXOPTA1 93
- Expander boards 93
- C:NXOPTC1 94
- Parameters 94
- Slave address 94
- 96 • vacon 97
- Real time record 99
- FAULT TRACING vacon • 99 100
- 100 • vacon FAULT TRACING 101
- FAULT TRACING vacon • 101 102
- Vacon distributor: 103
© 2020, manymanuals.es. Todos los derechos reservados | 0.029 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales